The Shintō era was largely invented in Kyōto: Umetada Myōju’s workshop trained the movement, Horikawa Kunihiro raised a generation, and the Hon’ami appraisers, who held no forge, governed the meaning of famous blades.
NihontoWatchNihontoWatch越前大掾藤原国次は初代国路の子とも、出羽大掾国路の門人とも云われ、たしかに作域が近似しています。寛永頃(1624年)に越前大掾を受領、後に越前守を名乗っています。出羽大掾国路との合作もまま見られ、特色として堀川国広や門下の国安や国儔、国路など云わる堀川物の影響が強くうかがえます。晩年は弟子の寿徹とともに肥後熊本へ移住したと伝えられています。越前大掾藤原国次銘の作品は意外と少なく、それは出羽大掾国路の向鍛冶を長く務めていたからと考えられています。 本作は、刃長が一尺一寸九分と寸延よりやや長い刃長の分類上は脇差で、身幅広く、反りがやや利く南北朝の寸延短刀姿を呈する一口です。表裏に古風な素剣と梵字に護摩橋を彫り上げています。地鉄は板目肌が良く練れて地沸が付く力強い鍛地金で、淡く映りが現れます。刃紋は低めの湾れ刃文で焼き出し、次第に高低差がつく互の目乱れ刃文となり飛び焼きを交えます。匂口は明るく冴えて沸が厚くつきます。刃中には砂流しが大胆に働くなどして見どころが満載です。帽子は先尖り加減で小丸へ深く返ります。茎は正に絶品といえる状態に、確りと銘と年紀が刻されています。本刀は越前大掾藤原国次の作域と特色を見事に示した一振であり、彼の代表作品といえるであろう御刀です。作品には写真の通り虎と豹の金具を用いた雅趣ある拵が附いています。内外ともに素晴らしい優品です。白鞘、黒呂塗鞘合口脇差拵、金着一重はばき、特別保存刀剣鑑定書附。
NihontoWatchOffered by World Seiyudo
This piece has sold
Get an email when a new Horikawa Kunitsugu piece hits the market.
Shinto · Echizen · around 1615-1624
Fujishiro Jo saku · Tōken Taikan top 49%
3 pieces on the market now
Echizen Daijo Fujiwara Kunitsugu is represented by a signed wakizashi designated Juyo Token at the 46th session in 2000. The published sources introduce him as one of the leading pupils of Dewa Daijo Kunimichi, together with the first-generation Shinano Daijo Tadakuni. His working dates are fixed by a katana signed Heianjo Fujiwara Kunitsugu and dated Kan'ei 11 (1634), whose reverse inscription records that it was forged in Edo in Bushu; from this the published sources suggest that in his comparatively early years he worked for a time in Edo. A further work signed Echizen no Kami Fujiwara Kunitsugu, with the reverse inscription 「於熊本以南蛮鉄」 (in Kumamoto, with imported nanban iron), shows that he later worked in Kumamoto as well.
The Kokon Kaji Biko records that in old age he signed as Hokyo Rai Kunitsugu Nyudo Jutetsu and worked in Higo around the Kanbun era, while noting that some regard Jutetsu as a different person. The published sources compare the Jutetsu signatures with his usual Echizen Daijo Kunitsugu signature, find the two characters of the name entirely in accord, and judge them to be one man, the Jutetsu works then belonging to his late years. They also consider that 「師国路の晩年には, その代作・代銘に任じていたと思われる」 (in the later years of his master Kunimichi he probably served as his substitute maker and substitute signer).
The designated wakizashi is a hira-zukuri blade with iori-mune, a notably wide mihaba, extended length and shallow sori, the characteristic shape of Keicho shinto. Its jigane is itame mixed with mokume and nagare-hada, standing and rough in the zanguri texture peculiar to Horikawa work, with very fine ji-nie adhering thickly and fine chikei. The temper is broad, ko-notare mixed with gunome, large gunome and angular elements, with ashi, deep nioi, thick and in places coarse nie, sunagashi, vigorous kinsuji and nie-suji, muneyaki in the upper half and a subdued nioiguchi; the boshi is rounded in a jizo-like form with hakikake, and futasuji-hi are carved on both sides. The published sources find in it, from shape to ji and ha, a result just like that of his master Kunimichi.
They note that 「大模様で華やかな志津風のこの手の作域は, 国次にはあまり経眠しないが」 (this large-patterned, showy Shizu-like manner is seldom seen in Kunitsugu), and that a work of this kind strengthens the view that he made substitute work for Kunimichi. They judge it of excellent workmanship and powerful in its large build, and add that 「加えて国次の作風を研究する上で, 資料的にも貴重である」 (it is moreover valuable as material for the study of Kunitsugu's style).
Where Kunitsugu stands among comparable artisans: across all of nihontō, and within tradition, era, and period. The tiers (Foremost · Leading · Major · Notable) weigh official designations from the NBTHK and Japan's Agency for Cultural Affairs, together with historical honors of lasting repute such as the Sansaku and Meibutsu-chō.
Select a lens to see how it's measured.
Shinto · Yamashiro
64 pieces on the market now
At Ichijo Horikawa in Kyoto, from Keicho 4 (1599), Horikawa Kunihiro gathered the pupils whose work the published sources name with his own as the opening of the shinto age. Kunihiro himself reached forging late and by a roundabout road. Born Tanaka and serving as a warrior under the Ito of Obi castle in Hyuga, he wandered the provinces after that house fell, forging where he stopped, his earliest dated blade cut in Hyuga in Tensho 4 (1576); his itinerant Tensho-uchi looked to late Soshu and late Seki, often run toward a hitatsura-like effect over devotional carving. The settlement in Kyoto changed that. There his stated aim, the sources write, lay in the revival of the Soshu-den tradition, the leaning strongest toward Shizu, and around that ideal he trained the men who carried his manner forward: Dewa no Kami Kunimichi, Kuniyasu, Osumi no Jo Masahiro, Echigo no Kami Kunitomo, the elder Kunisada and Kunisuke, with later and minor hands reaching Settsu, Echizen and Edo. Many of them, born like the master at Obi, followed him from Hyuga to the capital. The shared vocabulary is read first in the steel. The school forges an itame mixed with mokume that stands up, the grain raised into the loose, granular surface the commentaries name outright, the zanguri hada particular to Horikawa work, with ji-nie lying thick and chikei entering; on many blades a mizukage rises obliquely from the machi. Over that ground the prime manner is the Keicho-shinto sugata, wide with little taper and an extended chu-kissaki or o-kissaki, the build likened to a Nanbokucho odachi cut down, tempered in a notare and gunome with thick nie, sunagashi and long kinsuji, the nioiguchi often sinking into shizumi. Within that frame the pupils diverge sharply.
Kunimichi runs the flamboyant Shizu copy fully out and turns his boshi pointed in the Mishina manner, the Sanpin boshi the school otherwise does not show. Masahiro keeps the same Soshu-den worked at lower temperature, his temper calm and his mokume conspicuous; Kuniyasu and Kunitsugu stand closest of all to the master and signed for him. Kunitomo turns alone toward late Seki, his gunome round-headed and his chisel the finest in the group, and the elder Kunisada and Kunisuke carry the zanguri steel south into Osaka, the latter keeping the Ishido clove he was born to. Hiroyuki holds suguha over a blackish steel that recalls old Yamato, and the two Echizen Kunikiyo forge a dark, dense hokkoku-gane under a calm chu-suguha. A collector seeks Horikawa because the school stands at a hinge: Kunihiro is read as the first hand of the new-sword age, and the line he taught runs forward into the Osaka tradition through Kunisada and Kunisuke and into Echizen through Kunikiyo. To kantei the work, read the steel first, the standing zanguri surface and the oblique mizukage, then the sinking nioiguchi and the Soshu-revival notare with its sunagashi and kinsuji; the individual hand declares itself in the departures, Kunimichi's pointed boshi, Kunitomo's Seki gunome and compact tang, Kuniyasu's reversed file marks and two-character mei, Hiroyuki's kiri-yasuri. The founder and his closest pupils sit at the top of the line, Kunihiro signing almost everything he made, the large kata-ochi two-character mei beside his long residence signatures; because Kuniyasu, Masahiro, Kunitsugu and Hiromi worked as his daisaku, a share of the blades signed Kunihiro are in fact theirs. Provenance runs through the houses of the founder's own story and of the country, the Hyuga Ito he had served, the Shimazu of Kagoshima, the Imperial Family and Toyotomi Hideyori, with the tachi Kunihiro dedicated to the Hataeda Hachimangu still in the shrine's keeping. A signed Horikawa blade reaches a private collection only from time to time, carrying on its nakago the hand with which the new sword begins. Learn more →
| Smith | Era | Designated |
|---|---|---|
| Kunihiro國廣 | 1573-1613 | 147 |
| Kunimichi國路 | 1615-1624 | 75 |
| Kunisada國貞 | 1624-1646 | 87 |
| Kunitomo國儔 | 1596-1615 | 27 |
| Masahiro正弘 | 1596-1615 | 16 |
Kyōto: the revival workshop
The Shintō era was largely invented in Kyōto: Umetada Myōju’s workshop trained the movement, Horikawa Kunihiro raised a generation, and the Hon’ami appraisers, who held no forge, governed the meaning of famous blades.
A Hozon-certified blade judged to show notably superior workmanship and a better state of preservation. The bar is higher: re-tempered blades and most unsigned Muromachi/Edo works are excluded.
The NBTHK (Nihon Bijutsu Tōken Hozon Kyōkai, the Society for the Preservation of Japanese Art Swords) is a public-interest incorporated foundation founded in 1948 and supervised by Japan’s Agency for Cultural Affairs (Bunkachō); it is based at the Japanese Sword Museum in Tokyo. Its expert panels physically examine each submitted work (shinsa) and issue a certificate (kanteishō) ranking it by artistic and historical merit. NBTHK papers are the most widely recognized standard of authentication for Japanese swords and fittings.
NBTHK official siteNo cooling-off period or returns; refund only if the purchased sword is proven fake, capped at purchase price (excludes commission sales, accessories, auction items).