二世紀半の泰平のあいだ、刀は武器である以上に武士の身分の標章であった。江戸の実証と大坂の華やぎのように都市ごとの作風が育ち、時代の末には需要も細っていく。
Antique Japanese Sword Wakizashi Signed by Kaneyasu with NTHK Kanteisho Certificate 【Description】 This blade was signed by the second-generation Mutsu no Kami Kaneyasu (陸奥守包保). He was originally from Tango Province (the northern part of present-day Kyoto Prefecture). He studied sword-forging as an apprentice under the first-generation Mutsu no Kami Kaneyasu, who later adopted him, making him his legal son. Before succeeding his adoptive father’s smith name, he signed his works as Kaneshige (包重), engraving the signature in reverse—an intentional practice inherited from his master, who was left-handed. After formally taking over the name Kaneyasu, he began signing in the conventional orientation. For this reason, the second generation is known as “Right Mutsu” (右陸奥), while his master is referred to as “Left Mutsu” (左陸奥). He primarily forged swords in Edo and Osaka. Later in his career, together with his adoptive father, he entered the exclusive service of the Mizuno clan at Matsumoto Castle in present-day Nagano Prefecture. Based on extant works, his active period is dated to 1661–1689, during the early Edo period (late 17th century). Osaka Shinto The blades forged by Kaneyasu are categorized as Osaka Shinto. Shinto is Japanese Sword terminology that refers to the swords forged during 1596-1781. The blades made in the Osaka area during this period are called Osaka Shinto. There are many famous swordsmiths in this Osaka Shinto era. After Hideyoshi Toyotomi built Osaka castle, Osaka city flourished as a castle town and became the business center. Many swordsmiths moved to Osaka to look for better opportunities. They not only forged swords for those Samurai who lived in Osaka but also for feudal lords nationwide. One of the most notable characteristics of Osaka Shinto is its beauty in Jigane. Jigane is a visible steel surface pattern created by folding and hammering during the forging process), which made it possible by the location of Osaka. Osaka had close access to the Tamahagane(special carbon steel to make Japanese swords) production sites. The swordsmiths residing in Osaka were able to get high-quality carbon steel from these sites. 【 Blade】 Cutting Edge Length (Nagasa) :55.0 cm (21.6 inches) Curvature (Sori) :0.8 cm (0.31 inches) Hamon : the crystalline structure which forms along the cutting edge of a blade as a result of the hardening process Jimon(Jihada) : visible steel surface pattern created by folding and hammering during forging process Kissaki : Kissaki is the tip of the Japanese sword. Nakago : Nakago is the tang of the Japanese sword. Japanese swordsmiths left the black rust on the tang because it prevents red rust while the tang is in its handle. And the discoloration of the tang was created over time, and it is a great indicator for a Japanese sword specialist to estimate when the sword was forged. Habaki : Habaki is the equipment to make the blade not touch its scabbard inside. It prevents the blade from getting rusty and chipped. Authentication Paper : NTHK Kanteisho Certificate for the blade (No. 9603) NTHK , also known as NPO Nihon Touken Hozon Kai, is the oldest organization for sword authentication of Japanese swords in modern times. It was established in 1910 during the post-Samurai era. They authenticated the blade on February 7th in the 63rd year of Showa (1988). The purchaser will receive these original certificates as well. We can also translate what is written into English and make a PDF file for your record if you request. Registration Number : Saitama 18027 The Board of Education in Saitama prefecture issued a registration paper for this sword. It is called Jyu Hou Touken Rui Torokusho (銃砲刀剣類登録証). Bunkacho (The Agency for Cultural Affairs) acknowledges a Japanese sword with this paper as a work of art. The sword needs to be traditionally hand-forged and made of Tamahagane carbon steel to be registered in the system. With this paper, its owner in Japan can legally own an authentic Japanese sword. B
NihontoWatch在銘 · Osaka Shinto · 江戸 · 長さ 55cm · 反り 0.8cm
大和伝 · 摂津 · 1596-1615頃
刀剣大鑑 上位49%
現在1点販売中
大和伝 · 大和
現在21点販売中
文珠派は、説示が一様に「本国は大和、手掻派の末葉」[[c:1]]と伝える系統を出自とする。ここに収める作はいずれも南紀重国、すなわち通称九郎三郎を名のり、紀州明光山に住して文珠を号した初代重国の手になるもので、慶長年間に徳川家康に召し抱えられて駿府に作刀し、元和五年、家康の第十子徳川頼宣が紀州和歌山へ移封されるに従って和歌山へ移った経緯が繰り返し記される。銘も「和州手搔住重国於駿府造之」[[c:2]]から「於南紀重国造之」「於紀州和歌山重国作」[[c:3]]へと住地の推移を映し、駿府打と紀州打の双方が確認される。すなわち本派の説示が実際に扱う範囲は、大和手掻の末流を承けて駿府から紀州へと展開した桃山から江戸初期の一工とその作域であり、所伝として手掻包永を遠祖に置く点で一貫している。 作風について説示は、当工に大別して二様があると記す。一つはのたれに互の目を交えた乱れ刃で、相州上工、就中、郷(江)義弘に私淑したと想われるもの、他は御家芸というべき大和手掻の直刃を焼いて包永を髣髴とさせるものである。そしていずれの場合にも、板目が流れて杢を交え肌立ちごころとなる鍛えに、地沸が厚くつき、地景がよく入ってかねが冴える地鉄が共通し、刃中もよく沸づいて金筋・砂流しがかかり、殊に地刃の明るく冴える点を本領とする。相州伝の作は小のたれに小互の目・尖りごころの刃を交え、足・葉入り、沸厚くつき処々沸崩れ、湯走り状の飛焼を見せて放胆に乱れる。大和伝の作は中直刃を基調に喰違刃・二重刃・ほつれを交え、帽子は焼詰めごころに掃きかける。さらに両伝を加味してその上に独自の作域を樹立した一類があり、流れ肌や喰違刃に大和色を残しつつ強い沸と金筋に相州色を示すもので、文珠風の刃取りに連なる色合いとも評される。姿は身幅広く寸延びて先反りのつく慶長新刀の体配を採り、平造の脇指に先反りの目立つ造込みを当工の特徴とする。 伝承の上では、説示は地刃の沸の強さ、地景・金筋・砂流しの働き、明るく冴える地刃を鑑定の眼目に挙げ、なかでも相州伝の狙うところが郷にあることを繰り返し説く。帽子の掃きかけと返りの浅さ、流れた鍛肌など、相州伝の作にも本来の大和気質が看取される旨も指摘される。代表作には頼宣の重臣蔭山土佐守宗信や都筑藤一の所持銘を帯びた注文打、元和八年紀を有する脇指などがあり、来歴を記した銘文ともども重国研究上の資料として重んじられる。来歴の確かなものに紀州徳川家伝来の刀があり、長大な生ぶ茎の遺例は奉納刀の可能性も説かれる。当工の相州伝作は磨上げられた例が多く、生ぶ茎を残すものは稀少として珍重される。大和の祖法に相州伝を融合させ独自の作域を開いた点に、本派を貫く位置づけが認められる。 詳しく見る →
江戸時代
二世紀半の泰平のあいだ、刀は武器である以上に武士の身分の標章であった。江戸の実証と大坂の華やぎのように都市ごとの作風が育ち、時代の末には需要も細っていく。
NTHKの中心的な鑑定書で、相応の出来を備えた作に発行されます。在銘作は銘の正真を、無銘作は審査員による刀工・流派の極めを示します。点数を記す詳細な審査表が付されます。
NTHK（日本刀剣保存会）は、NBTHK（1948年設立）に先立つ1910年に創立された、日本で最も古い刀剣鑑定団体です。長く会を率いた会長の没後、NTHKとNTHK-NPOの二つに分かれ、いずれも審査を続けています。NTHKの鑑定書は、点数と審査員の所見を併記する詳細な審査表が特徴で、特に無銘作の極めに定評があります。
Returns/exchanges limited to defects caused by shipping (except willful misconduct or gross negligence by the company); customers must contact within 72 hours of receiving the product.
Antique Japanese Sword Wakizashi Signed by Kaneyasu with NTHK Kanteisho Certificate 【Description】 This blade was signed by the second-generation Mutsu no Kami Kaneyasu (陸奥守包保). He was originally from Tango Province (the northern part of present-day Kyoto Prefecture). He studied sword-forging as an apprentice under the first-generation Mutsu no Kami Kaneyasu, who later adopted him, making him his legal son. Before succeeding his adoptive father’s smith name, he signed his works as Kaneshige (包重), engraving the signature in reverse—an intentional practice inherited from his master, who was left-handed. After formally taking over the name Kaneyasu, he began signing in the conventional orientation. For this reason, the second generation is known as “Right Mutsu” (右陸奥), while his master is referred to as “Left Mutsu” (左陸奥). He primarily forged swords in Edo and Osaka. Later in his career, together with his adoptive father, he entered the exclusive service of the Mizuno clan at Matsumoto Castle in present-day Nagano Prefecture. Based on extant works, his active period is dated to 1661–1689, during the early Edo period (late 17th century). Osaka Shinto The blades forged by Kaneyasu are categorized as Osaka Shinto. Shinto is Japanese Sword terminology that refers to the swords forged during 1596-1781. The blades made in the Osaka area during this period are called Osaka Shinto. There are many famous swordsmiths in this Osaka Shinto era. After Hideyoshi Toyotomi built Osaka castle, Osaka city flourished as a castle town and became the business center. Many swordsmiths moved to Osaka to look for better opportunities. They not only forged swords for those Samurai who lived in Osaka but also for feudal lords nationwide. One of the most notable characteristics of Osaka Shinto is its beauty in Jigane. Jigane is a visible steel surface pattern created by folding and hammering during the forging process), which made it possible by the location of Osaka. Osaka had close access to the Tamahagane(special carbon steel to make Japanese swords) production sites. The swordsmiths residing in Osaka were able to get high-quality carbon steel from these sites. 【 Blade】 Cutting Edge Length (Nagasa) :55.0 cm (21.6 inches) Curvature (Sori) :0.8 cm (0.31 inches) Hamon : the crystalline structure which forms along the cutting edge of a blade as a result of the hardening process Jimon(Jihada) : visible steel surface pattern created by folding and hammering during forging process Kissaki : Kissaki is the tip of the Japanese sword. Nakago : Nakago is the tang of the Japanese sword. Japanese swordsmiths left the black rust on the tang because it prevents red rust while the tang is in its handle. And the discoloration of the tang was created over time, and it is a great indicator for a Japanese sword specialist to estimate when the sword was forged. Habaki : Habaki is the equipment to make the blade not touch its scabbard inside. It prevents the blade from getting rusty and chipped. Authentication Paper : NTHK Kanteisho Certificate for the blade (No. 9603) NTHK , also known as NPO Nihon Touken Hozon Kai, is the oldest organization for sword authentication of Japanese swords in modern times. It was established in 1910 during the post-Samurai era. They authenticated the blade on February 7th in the 63rd year of Showa (1988). The purchaser will receive these original certificates as well. We can also translate what is written into English and make a PDF file for your record if you request. Registration Number : Saitama 18027 The Board of Education in Saitama prefecture issued a registration paper for this sword. It is called Jyu Hou Touken Rui Torokusho (銃砲刀剣類登録証). Bunkacho (The Agency for Cultural Affairs) acknowledges a Japanese sword with this paper as a work of art. The sword needs to be traditionally hand-forged and made of Tamahagane carbon steel to be registered in the system. With this paper, its owner in Japan can legally own an authentic Japanese sword. B
NihontoWatch在銘 · Osaka Shinto · 江戸 · 長さ 55cm · 反り 0.8cm
大和伝 · 摂津 · 1596-1615頃
刀剣大鑑 上位49%
現在1点販売中
大和伝 · 大和
現在21点販売中
文珠派は、説示が一様に「本国は大和、手掻派の末葉」[[c:1]]と伝える系統を出自とする。ここに収める作はいずれも南紀重国、すなわち通称九郎三郎を名のり、紀州明光山に住して文珠を号した初代重国の手になるもので、慶長年間に徳川家康に召し抱えられて駿府に作刀し、元和五年、家康の第十子徳川頼宣が紀州和歌山へ移封されるに従って和歌山へ移った経緯が繰り返し記される。銘も「和州手搔住重国於駿府造之」[[c:2]]から「於南紀重国造之」「於紀州和歌山重国作」[[c:3]]へと住地の推移を映し、駿府打と紀州打の双方が確認される。すなわち本派の説示が実際に扱う範囲は、大和手掻の末流を承けて駿府から紀州へと展開した桃山から江戸初期の一工とその作域であり、所伝として手掻包永を遠祖に置く点で一貫している。 作風について説示は、当工に大別して二様があると記す。一つはのたれに互の目を交えた乱れ刃で、相州上工、就中、郷(江)義弘に私淑したと想われるもの、他は御家芸というべき大和手掻の直刃を焼いて包永を髣髴とさせるものである。そしていずれの場合にも、板目が流れて杢を交え肌立ちごころとなる鍛えに、地沸が厚くつき、地景がよく入ってかねが冴える地鉄が共通し、刃中もよく沸づいて金筋・砂流しがかかり、殊に地刃の明るく冴える点を本領とする。相州伝の作は小のたれに小互の目・尖りごころの刃を交え、足・葉入り、沸厚くつき処々沸崩れ、湯走り状の飛焼を見せて放胆に乱れる。大和伝の作は中直刃を基調に喰違刃・二重刃・ほつれを交え、帽子は焼詰めごころに掃きかける。さらに両伝を加味してその上に独自の作域を樹立した一類があり、流れ肌や喰違刃に大和色を残しつつ強い沸と金筋に相州色を示すもので、文珠風の刃取りに連なる色合いとも評される。姿は身幅広く寸延びて先反りのつく慶長新刀の体配を採り、平造の脇指に先反りの目立つ造込みを当工の特徴とする。 伝承の上では、説示は地刃の沸の強さ、地景・金筋・砂流しの働き、明るく冴える地刃を鑑定の眼目に挙げ、なかでも相州伝の狙うところが郷にあることを繰り返し説く。帽子の掃きかけと返りの浅さ、流れた鍛肌など、相州伝の作にも本来の大和気質が看取される旨も指摘される。代表作には頼宣の重臣蔭山土佐守宗信や都筑藤一の所持銘を帯びた注文打、元和八年紀を有する脇指などがあり、来歴を記した銘文ともども重国研究上の資料として重んじられる。来歴の確かなものに紀州徳川家伝来の刀があり、長大な生ぶ茎の遺例は奉納刀の可能性も説かれる。当工の相州伝作は磨上げられた例が多く、生ぶ茎を残すものは稀少として珍重される。大和の祖法に相州伝を融合させ独自の作域を開いた点に、本派を貫く位置づけが認められる。 詳しく見る →
江戸時代
二世紀半の泰平のあいだ、刀は武器である以上に武士の身分の標章であった。江戸の実証と大坂の華やぎのように都市ごとの作風が育ち、時代の末には需要も細っていく。
NTHKの中心的な鑑定書で、相応の出来を備えた作に発行されます。在銘作は銘の正真を、無銘作は審査員による刀工・流派の極めを示します。点数を記す詳細な審査表が付されます。
NTHK（日本刀剣保存会）は、NBTHK（1948年設立）に先立つ1910年に創立された、日本で最も古い刀剣鑑定団体です。長く会を率いた会長の没後、NTHKとNTHK-NPOの二つに分かれ、いずれも審査を続けています。NTHKの鑑定書は、点数と審査員の所見を併記する詳細な審査表が特徴で、特に無銘作の極めに定評があります。
Returns/exchanges limited to defects caused by shipping (except willful misconduct or gross negligence by the company); customers must contact within 72 hours of receiving the product.
