NihontoWatch Mon

NihontoWatchBETA

MarketAuctions
Encyclopedia
NihontoWatch Mon

NihontoWatchBETA

MarketAuctions
Encyclopedia

Description

Weight (toushin only): 802g It has appeared, it has appeared—a katana handed down through generations of the Shinshu Sanada family has emerged. This sword was crafted in the Echizen Domain (Fukui Prefecture), a 680,000 koku fief which, during the Edo period, was ruled by Yuki Hideyasu, the second son of Tokugawa Ieyasu. Prior to that, it was a vital strategic stronghold for controlling the northern provinces, where Oda’s fierce general "Oni" Shibata Katsuie and Maeda Toshiie were active. At the time, it was a country that prospered greatly through the Kitamaebune trade. In the Bakumatsu period, Matsudaira Shungaku, one of the "Four Wise Lords of the Bakumatsu," is very famous. The smith who crafted this sword in Echizen, Echizen Ju Sagami no Kami Fujiwara Kunitsuna, was a high-ranking disciple of the first generation Echizen Kanetane. He was a tosho active around the Keian era (1648, 378 years ago) of the early Edo period and belonged to the same Echizen Shimosaka lineage as Echizen Yasutsugu. Kunitsuna’s real name was Tabeie. Like Echizen Yasutsugu, he later went to Edo and produced swords there as well. This sword was originally a long blade of 2 shaku 4 sun, which a later bushi shortened slightly to match his own swordsmanship because he desperately wanted it as his personal sashiryo. It presents a magnificent and robust sugata with a wide moto-mihaba, a distinct difference between the moto and saki-mihaba, and a shallow sori. The jigane is forged in itame-hada with abundant ji-nie. The hamon is finished in nioi-deki with ko-nie, featuring gunome-ba with rounded heads, flat-topped gunome, and saka-gunome. Small tobiyaki are tempered into the ji; when viewed through reflected light, the blade is magnificent, showing a spirited hamon that appears three-dimensional, as if rising or floating up. The Edo-period koshirae further adds splendor to this sword, featuring a kawari-nuri saya, an iron tsuba with the mei of Nobuie, and fuchi-kashira made of shakudo nanako-ji with high-relief (takabori) carvings of the musubi-karigane (tied wild goose), which is said to be the kamon of the Sanada family. This sword has been cherished by the family for generations, but as they have grown old, we have received it with the request to pass it on at a low price to someone who will treasure it. The Showa 26 "Daimyo Registration" from Gunma Prefecture—the neighbor of the Sanada family's Nagano Prefecture—is also precious. On this occasion, through the kindness of the owner, we are offering it at a special bargain price. Please do enjoy it.

NihontoWatch MonNihontoWatchBETA
MarketAuctionsEncyclopedia
Swords›Kunitsuna›Japanese Sword Echizenju Sagaminokami Fujiwara Kunitsuna (Sanada Family Heirloom)
katanaTokubetsu Kichō
Shimosaka Kunitsuna

Japanese Sword Echizenju Sagaminokami Fujiwara Kunitsuna (Sanada Family Heirloom)

den · Edo · nagasa 71.5cm · sori 1.2cm

¥860,000
Visit seller website →
Shimosaka Kunitsuna — 1 of 32
Shimosaka Kunitsuna — 2 of 32
Shimosaka Kunitsuna — 3 of 32
Shimosaka Kunitsuna — 4 of 32
Shimosaka Kunitsuna — 5 of 32
Shimosaka Kunitsuna — 6 of 32
Shimosaka Kunitsuna — 7 of 32
Shimosaka Kunitsuna — 8 of 32
Shimosaka Kunitsuna — 9 of 32
Shimosaka Kunitsuna — 10 of 32
Shimosaka Kunitsuna — 11 of 32
Shimosaka Kunitsuna — 12 of 32
Shimosaka Kunitsuna — 13 of 32
Shimosaka Kunitsuna — 14 of 32
Shimosaka Kunitsuna — 15 of 32
Shimosaka Kunitsuna — 16 of 32
Shimosaka Kunitsuna — 17 of 32
Shimosaka Kunitsuna — 18 of 32
Shimosaka Kunitsuna — 19 of 32
Shimosaka Kunitsuna — 20 of 32
Shimosaka Kunitsuna — 21 of 32
Shimosaka Kunitsuna — 22 of 32
Shimosaka Kunitsuna — 23 of 32
Shimosaka Kunitsuna — 24 of 32
Shimosaka Kunitsuna — 25 of 32
Shimosaka Kunitsuna — 26 of 32
Shimosaka Kunitsuna — 27 of 32
Shimosaka Kunitsuna — 28 of 32
Shimosaka Kunitsuna — 29 of 32
Shimosaka Kunitsuna — 30 of 32
Shimosaka Kunitsuna — 31 of 32
Shimosaka Kunitsuna — 32 of 32
1 / 32
1 / 32
Shimosaka Kunitsuna — 1 of 32Shimosaka Kunitsuna — 2 of 32Shimosaka Kunitsuna — 3 of 32Shimosaka Kunitsuna — 4 of 32Shimosaka Kunitsuna — 5 of 32Shimosaka Kunitsuna — 6 of 32Shimosaka Kunitsuna — 7 of 32Shimosaka Kunitsuna — 8 of 32Shimosaka Kunitsuna — 9 of 32Shimosaka Kunitsuna — 10 of 32Shimosaka Kunitsuna — 11 of 32Shimosaka Kunitsuna — 12 of 32Shimosaka Kunitsuna — 13 of 32Shimosaka Kunitsuna — 14 of 32Shimosaka Kunitsuna — 15 of 32Shimosaka Kunitsuna — 16 of 32Shimosaka Kunitsuna — 17 of 32Shimosaka Kunitsuna — 18 of 32Shimosaka Kunitsuna — 19 of 32Shimosaka Kunitsuna — 20 of 32Shimosaka Kunitsuna — 21 of 32Shimosaka Kunitsuna — 22 of 32Shimosaka Kunitsuna — 23 of 32Shimosaka Kunitsuna — 24 of 32Shimosaka Kunitsuna — 25 of 32Shimosaka Kunitsuna — 26 of 32Shimosaka Kunitsuna — 27 of 32Shimosaka Kunitsuna — 28 of 32Shimosaka Kunitsuna — 29 of 32Shimosaka Kunitsuna — 30 of 32Shimosaka Kunitsuna — 31 of 32Shimosaka Kunitsuna — 32 of 32
Measurements & details
Smith
Shimosaka Kunitsuna
Type
Katana
Period
Around 1684–1688(Jokyo)
Province
越前
Signature
den
Measurements
Nagasa 71.5cmSori 1.2cmMotohaba 3.15cmSakihaba 2.1cmKasane 0.68cm
Description

Weight (toushin only): 802g It has appeared, it has appeared—a katana handed down through generations of the Shinshu Sanada family has emerged. This sword was crafted in the Echizen Domain (Fukui Prefecture), a 680,000 koku fief which, during the Edo period, was ruled by Yuki Hideyasu, the second son of Tokugawa Ieyasu. Prior to that, it was a vital strategic stronghold for controlling the northern provinces, where Oda’s fierce general "Oni" Shibata Katsuie and Maeda Toshiie were active. At the time, it was a country that prospered greatly through the Kitamaebune trade. In the Bakumatsu period, Matsudaira Shungaku, one of the "Four Wise Lords of the Bakumatsu," is very famous. The smith who crafted this sword in Echizen, Echizen Ju Sagami no Kami Fujiwara Kunitsuna, was a high-ranking disciple of the first generation Echizen Kanetane. He was a tosho active around the Keian era (1648, 378 years ago) of the early Edo period and belonged to the same Echizen Shimosaka lineage as Echizen Yasutsugu. Kunitsuna’s real name was Tabeie. Like Echizen Yasutsugu, he later went to Edo and produced swords there as well. This sword was originally a long blade of 2 shaku 4 sun, which a later bushi shortened slightly to match his own swordsmanship because he desperately wanted it as his personal sashiryo. It presents a magnificent and robust sugata with a wide moto-mihaba, a distinct difference between the moto and saki-mihaba, and a shallow sori. The jigane is forged in itame-hada with abundant ji-nie. The hamon is finished in nioi-deki with ko-nie, featuring gunome-ba with rounded heads, flat-topped gunome, and saka-gunome. Small tobiyaki are tempered into the ji; when viewed through reflected light, the blade is magnificent, showing a spirited hamon that appears three-dimensional, as if rising or floating up. The Edo-period koshirae further adds splendor to this sword, featuring a kawari-nuri saya, an iron tsuba with the mei of Nobuie, and fuchi-kashira made of shakudo nanako-ji with high-relief (takabori) carvings of the musubi-karigane (tied wild goose), which is said to be the kamon of the Sanada family. This sword has been cherished by the family for generations, but as they have grown old, we have received it with the request to pass it on at a low price to someone who will treasure it. The Showa 26 "Daimyo Registration" from Gunma Prefecture—the neighbor of the Sanada family's Nagano Prefecture—is also precious. On this occasion, through the kindness of the owner, we are offering it at a special bargain price. Please do enjoy it.

About the maker

Kunitsuna

國綱

Echizen · around 1684-1688

Tōken Taikan top 87%

1 piece on the market now

›
1 work by Kunitsuna on the market→
Kunitsuna — full profile
Authenticity not guaranteed

This work carries older NBTHK “Kichō”-era papers, which the NBTHK no longer issues and now regards as unreliable. To confirm the attribution, submission to an official Japanese examination body (such as the NBTHK or NTHK) for modern certification could be considered.

Seller
N
Nipponto
Established 1953 · 73 yrs on the market
🇯🇵Ships from Japan
›
✓Verified dealernipponto.co.jp
Settles in JPY
✓Ships worldwide✓English supportPayPalCredit card
Return policy

For returns due to customer circumstances, the cost is the customer's responsibility. For returns due to our mis-shipment or a defective item, we bear the cost.

View all of Nipponto’s listings→View this item on the dealer’s site→

Swords

  • Katana
  • Wakizashi
  • Tantō
  • Tachi
  • Naginata
  • Yari

Fittings

  • Tsuba
  • Fuchi-Kashira
  • Kozuka
  • Menuki

By Certification

  • Tokujū
  • Jūyō
  • Tokuho
  • Hozon

Resources

  • Dealer Directory
  • Artist Directory
  • Glossary
  • Browse All
Nihontowatch© 2026
TermsPrivacyCookiesAbout

Description

Weight (toushin only): 802g It has appeared, it has appeared—a katana handed down through generations of the Shinshu Sanada family has emerged. This sword was crafted in the Echizen Domain (Fukui Prefecture), a 680,000 koku fief which, during the Edo period, was ruled by Yuki Hideyasu, the second son of Tokugawa Ieyasu. Prior to that, it was a vital strategic stronghold for controlling the northern provinces, where Oda’s fierce general "Oni" Shibata Katsuie and Maeda Toshiie were active. At the time, it was a country that prospered greatly through the Kitamaebune trade. In the Bakumatsu period, Matsudaira Shungaku, one of the "Four Wise Lords of the Bakumatsu," is very famous. The smith who crafted this sword in Echizen, Echizen Ju Sagami no Kami Fujiwara Kunitsuna, was a high-ranking disciple of the first generation Echizen Kanetane. He was a tosho active around the Keian era (1648, 378 years ago) of the early Edo period and belonged to the same Echizen Shimosaka lineage as Echizen Yasutsugu. Kunitsuna’s real name was Tabeie. Like Echizen Yasutsugu, he later went to Edo and produced swords there as well. This sword was originally a long blade of 2 shaku 4 sun, which a later bushi shortened slightly to match his own swordsmanship because he desperately wanted it as his personal sashiryo. It presents a magnificent and robust sugata with a wide moto-mihaba, a distinct difference between the moto and saki-mihaba, and a shallow sori. The jigane is forged in itame-hada with abundant ji-nie. The hamon is finished in nioi-deki with ko-nie, featuring gunome-ba with rounded heads, flat-topped gunome, and saka-gunome. Small tobiyaki are tempered into the ji; when viewed through reflected light, the blade is magnificent, showing a spirited hamon that appears three-dimensional, as if rising or floating up. The Edo-period koshirae further adds splendor to this sword, featuring a kawari-nuri saya, an iron tsuba with the mei of Nobuie, and fuchi-kashira made of shakudo nanako-ji with high-relief (takabori) carvings of the musubi-karigane (tied wild goose), which is said to be the kamon of the Sanada family. This sword has been cherished by the family for generations, but as they have grown old, we have received it with the request to pass it on at a low price to someone who will treasure it. The Showa 26 "Daimyo Registration" from Gunma Prefecture—the neighbor of the Sanada family's Nagano Prefecture—is also precious. On this occasion, through the kindness of the owner, we are offering it at a special bargain price. Please do enjoy it.

NihontoWatch MonNihontoWatchBETA
MarketAuctionsEncyclopedia
Swords›Kunitsuna›Japanese Sword Echizenju Sagaminokami Fujiwara Kunitsuna (Sanada Family Heirloom)
katanaTokubetsu Kichō
Shimosaka Kunitsuna

Japanese Sword Echizenju Sagaminokami Fujiwara Kunitsuna (Sanada Family Heirloom)

den · Edo · nagasa 71.5cm · sori 1.2cm

¥860,000
Visit seller website →
Shimosaka Kunitsuna — 1 of 32
Shimosaka Kunitsuna — 2 of 32
Shimosaka Kunitsuna — 3 of 32
Shimosaka Kunitsuna — 4 of 32
Shimosaka Kunitsuna — 5 of 32
Shimosaka Kunitsuna — 6 of 32
Shimosaka Kunitsuna — 7 of 32
Shimosaka Kunitsuna — 8 of 32
Shimosaka Kunitsuna — 9 of 32
Shimosaka Kunitsuna — 10 of 32
Shimosaka Kunitsuna — 11 of 32
Shimosaka Kunitsuna — 12 of 32
Shimosaka Kunitsuna — 13 of 32
Shimosaka Kunitsuna — 14 of 32
Shimosaka Kunitsuna — 15 of 32
Shimosaka Kunitsuna — 16 of 32
Shimosaka Kunitsuna — 17 of 32
Shimosaka Kunitsuna — 18 of 32
Shimosaka Kunitsuna — 19 of 32
Shimosaka Kunitsuna — 20 of 32
Shimosaka Kunitsuna — 21 of 32
Shimosaka Kunitsuna — 22 of 32
Shimosaka Kunitsuna — 23 of 32
Shimosaka Kunitsuna — 24 of 32
Shimosaka Kunitsuna — 25 of 32
Shimosaka Kunitsuna — 26 of 32
Shimosaka Kunitsuna — 27 of 32
Shimosaka Kunitsuna — 28 of 32
Shimosaka Kunitsuna — 29 of 32
Shimosaka Kunitsuna — 30 of 32
Shimosaka Kunitsuna — 31 of 32
Shimosaka Kunitsuna — 32 of 32
1 / 32
1 / 32
Shimosaka Kunitsuna — 1 of 32Shimosaka Kunitsuna — 2 of 32Shimosaka Kunitsuna — 3 of 32Shimosaka Kunitsuna — 4 of 32Shimosaka Kunitsuna — 5 of 32Shimosaka Kunitsuna — 6 of 32Shimosaka Kunitsuna — 7 of 32Shimosaka Kunitsuna — 8 of 32Shimosaka Kunitsuna — 9 of 32Shimosaka Kunitsuna — 10 of 32Shimosaka Kunitsuna — 11 of 32Shimosaka Kunitsuna — 12 of 32Shimosaka Kunitsuna — 13 of 32Shimosaka Kunitsuna — 14 of 32Shimosaka Kunitsuna — 15 of 32Shimosaka Kunitsuna — 16 of 32Shimosaka Kunitsuna — 17 of 32Shimosaka Kunitsuna — 18 of 32Shimosaka Kunitsuna — 19 of 32Shimosaka Kunitsuna — 20 of 32Shimosaka Kunitsuna — 21 of 32Shimosaka Kunitsuna — 22 of 32Shimosaka Kunitsuna — 23 of 32Shimosaka Kunitsuna — 24 of 32Shimosaka Kunitsuna — 25 of 32Shimosaka Kunitsuna — 26 of 32Shimosaka Kunitsuna — 27 of 32Shimosaka Kunitsuna — 28 of 32Shimosaka Kunitsuna — 29 of 32Shimosaka Kunitsuna — 30 of 32Shimosaka Kunitsuna — 31 of 32Shimosaka Kunitsuna — 32 of 32
Measurements & details
Smith
Shimosaka Kunitsuna
Type
Katana
Period
Around 1684–1688(Jokyo)
Province
越前
Signature
den
Measurements
Nagasa 71.5cmSori 1.2cmMotohaba 3.15cmSakihaba 2.1cmKasane 0.68cm
Description

Weight (toushin only): 802g It has appeared, it has appeared—a katana handed down through generations of the Shinshu Sanada family has emerged. This sword was crafted in the Echizen Domain (Fukui Prefecture), a 680,000 koku fief which, during the Edo period, was ruled by Yuki Hideyasu, the second son of Tokugawa Ieyasu. Prior to that, it was a vital strategic stronghold for controlling the northern provinces, where Oda’s fierce general "Oni" Shibata Katsuie and Maeda Toshiie were active. At the time, it was a country that prospered greatly through the Kitamaebune trade. In the Bakumatsu period, Matsudaira Shungaku, one of the "Four Wise Lords of the Bakumatsu," is very famous. The smith who crafted this sword in Echizen, Echizen Ju Sagami no Kami Fujiwara Kunitsuna, was a high-ranking disciple of the first generation Echizen Kanetane. He was a tosho active around the Keian era (1648, 378 years ago) of the early Edo period and belonged to the same Echizen Shimosaka lineage as Echizen Yasutsugu. Kunitsuna’s real name was Tabeie. Like Echizen Yasutsugu, he later went to Edo and produced swords there as well. This sword was originally a long blade of 2 shaku 4 sun, which a later bushi shortened slightly to match his own swordsmanship because he desperately wanted it as his personal sashiryo. It presents a magnificent and robust sugata with a wide moto-mihaba, a distinct difference between the moto and saki-mihaba, and a shallow sori. The jigane is forged in itame-hada with abundant ji-nie. The hamon is finished in nioi-deki with ko-nie, featuring gunome-ba with rounded heads, flat-topped gunome, and saka-gunome. Small tobiyaki are tempered into the ji; when viewed through reflected light, the blade is magnificent, showing a spirited hamon that appears three-dimensional, as if rising or floating up. The Edo-period koshirae further adds splendor to this sword, featuring a kawari-nuri saya, an iron tsuba with the mei of Nobuie, and fuchi-kashira made of shakudo nanako-ji with high-relief (takabori) carvings of the musubi-karigane (tied wild goose), which is said to be the kamon of the Sanada family. This sword has been cherished by the family for generations, but as they have grown old, we have received it with the request to pass it on at a low price to someone who will treasure it. The Showa 26 "Daimyo Registration" from Gunma Prefecture—the neighbor of the Sanada family's Nagano Prefecture—is also precious. On this occasion, through the kindness of the owner, we are offering it at a special bargain price. Please do enjoy it.

About the maker

Kunitsuna

國綱

Echizen · around 1684-1688

Tōken Taikan top 87%

1 piece on the market now

›
1 work by Kunitsuna on the market→
Kunitsuna — full profile
Authenticity not guaranteed

This work carries older NBTHK “Kichō”-era papers, which the NBTHK no longer issues and now regards as unreliable. To confirm the attribution, submission to an official Japanese examination body (such as the NBTHK or NTHK) for modern certification could be considered.

Seller
N
Nipponto
Established 1953 · 73 yrs on the market
🇯🇵Ships from Japan
›
✓Verified dealernipponto.co.jp
Settles in JPY
✓Ships worldwide✓English supportPayPalCredit card
Return policy

For returns due to customer circumstances, the cost is the customer's responsibility. For returns due to our mis-shipment or a defective item, we bear the cost.

View all of Nipponto’s listings→View this item on the dealer’s site→

Swords

  • Katana
  • Wakizashi
  • Tantō
  • Tachi
  • Naginata
  • Yari

Fittings

  • Tsuba
  • Fuchi-Kashira
  • Kozuka
  • Menuki

By Certification

  • Tokujū
  • Jūyō
  • Tokuho
  • Hozon

Resources

  • Dealer Directory
  • Artist Directory
  • Glossary
  • Browse All
Nihontowatch© 2026
TermsPrivacyCookiesAbout
NihontoWatch Mon

NihontoWatchBETA

MarketAuctions
Encyclopedia
NihontoWatch Mon

NihontoWatchBETA

MarketAuctions
Encyclopedia