Around 1800 Suishinshi Masahide argued in his writings that the craft must return to the old masters’ methods: the fukkotō revival. His greatest successor Naotane worked convincingly in Bizen and Sōshū manners that had been dead for centuries.
This is a katana by Ujishige from Banshu Tegarayama-fumoto. The blade is certified as Tokubetsu Hozon Token by NBTHK. It was made in the late Edo period, around 1781.
NihontoWatchmei · Tenmei (1781-1789) · nagasa 68.5cm · sori 1.2cm
Shinshinto · Harima · around 1764-1772
Tōken Taikan top 76%
1 piece on the market now
Shinshinto · Harima
6 pieces on the market now
At the foot of Mount Tegara in Himeji, Harima province, a family of smiths took the mountain's name as their own across successive generations, descending from the first-generation Yamato no Daijō Fujiwara Ujishige. The setsumei trace this Banshū line through its best-documented figure, Tegarayama Masashige[[c:1]], commonly called Asashichi or Chōshichi and using the art name Tankasai. He was the younger brother of the third-generation Tegarayama Ujishige, first succeeded to the name of the fourth-generation Ujishige, and only later changed his signature to Masashige. In Tenmei 8 (1788) he entered the service of Matsudaira Sadanobu, lord of Shirakawa in Ōshū, as a retained smith (kakae-kaji) and moved to Edo, where he resided at Surugadai in Kanda; in the fourth month of Kyōwa 3 (1803) he received the honorary title Kai no Kami. One setsumei records that in Edo he studied under Suishinshi Masahide. Around the start of the Bunsei era he forged for a time in Osaka before returning to Edo, and from his lord Rakuō he was granted the two characters "Shinmyō," which he cut on the works he held most successful. The hand the setsumei describe is a Soshu-toned revival built on the tōran-midare of Tsuda Echizen no Kami Sukehiro, whose style Masashige privately admired (shishuku). The forging runs to tightly compacted ko-itame-hada with ji-nie adhering thickly, fine chikei entering, and at times a quiet near-muji ground; the steel reads clear.
Most blades open with a suguha or sugu yakidashi at the base and then rise into a billowing tōran-style large gunome-midare, mixed with notare, slightly pointed (togari-gokoro) elements, and arrow-nock (yahazu) shapes likened to surging waves. The temper carries deep nioi, evenly adhering ko-nie, ashi and yō, with sunagashi and kinsuji threading the edge and tobiyaki, yubashiri, and muneyaki breaking out above it; the nioiguchi tends bright. The bōshi is generally sugu ending in ko-maru, sometimes with hakikake and a long kaeri. Beyond this signature manner he also worked shallow notare of wide yakihaba and plain suguha, so the orderly large gunome that refuses to collapse, the pointed accents within the ha, and the wide mihaba of his forms serve as the readiest marks of his work. Across the register the kantei points cluster around that controlled tōran and its lively ji and ha, while one wakizashi, mingling yahazu into the edge, prompts the observation that Gonnoshin Terukane may also have been in mind. Self-carved horimono recur and aid attribution: jewel-chasing and ascending or descending dragons, bonji, the sankō-tsuka-ken, and hi, with tangs reading "hori dōsaku" to record the smith's own chisel. Several inscriptions carry documentary weight, naming Surugadai and Shundai in Buyō as places of forging, Ishū Dewa iron also used by Katayama Munetsugu, and a commission for Kosugi Tamenaga, a retainer of the Koga domain; a Juyo wakizashi signed "Ōshū Shirakawa kashin Masashige" bears self-cut dragon, bonji, and sankō-tsuka-ken recorded on its tang. The blades signed with bold, thick-chisel mei over ubu tangs finished in keshō ō-sujikai, dated through the Kansei and Kyōwa years, mark Tegarayama as a Himeji-rooted shinshintō line whose strength lay in the recreation of Sukehiro's waves. Learn more →
| Smith | Era | Designated |
|---|---|---|
| Masashige正繁 | 1789-1801 | 13 |
| Ujishige氏繁 | 1751-1764 | 0 |
| Ujishige氏繁 | 1781-1789 | 0 |
| Ujishige氏繁 | 1789-1801 | 0 |
| Masanao正直 | 1804-1818 | 0 |
The Shinshintō revival
Around 1800 Suishinshi Masahide argued in his writings that the craft must return to the old masters’ methods: the fukkotō revival. His greatest successor Naotane worked convincingly in Bizen and Sōshū manners that had been dead for centuries.
A Hozon-certified blade judged to show notably superior workmanship and a better state of preservation. The bar is higher: re-tempered blades and most unsigned Muromachi/Edo works are excluded.
The NBTHK (Nihon Bijutsu Tōken Hozon Kyōkai, the Society for the Preservation of Japanese Art Swords) is a public-interest incorporated foundation founded in 1948 and supervised by Japan’s Agency for Cultural Affairs (Bunkachō); it is based at the Japanese Sword Museum in Tokyo. Its expert panels physically examine each submitted work (shinsa) and issue a certificate (kanteishō) ranking it by artistic and historical merit. NBTHK papers are the most widely recognized standard of authentication for Japanese swords and fittings.
NBTHK official siteNo cooling-off period or returns; refund only if the purchased sword is proven fake, capped at purchase price (excludes commission sales, accessories, auction items).
This is a katana by Ujishige from Banshu Tegarayama-fumoto. The blade is certified as Tokubetsu Hozon Token by NBTHK. It was made in the late Edo period, around 1781.
NihontoWatchmei · Tenmei (1781-1789) · nagasa 68.5cm · sori 1.2cm
Shinshinto · Harima · around 1764-1772
Tōken Taikan top 76%
1 piece on the market now
Shinshinto · Harima
6 pieces on the market now
At the foot of Mount Tegara in Himeji, Harima province, a family of smiths took the mountain's name as their own across successive generations, descending from the first-generation Yamato no Daijō Fujiwara Ujishige. The setsumei trace this Banshū line through its best-documented figure, Tegarayama Masashige[[c:1]], commonly called Asashichi or Chōshichi and using the art name Tankasai. He was the younger brother of the third-generation Tegarayama Ujishige, first succeeded to the name of the fourth-generation Ujishige, and only later changed his signature to Masashige. In Tenmei 8 (1788) he entered the service of Matsudaira Sadanobu, lord of Shirakawa in Ōshū, as a retained smith (kakae-kaji) and moved to Edo, where he resided at Surugadai in Kanda; in the fourth month of Kyōwa 3 (1803) he received the honorary title Kai no Kami. One setsumei records that in Edo he studied under Suishinshi Masahide. Around the start of the Bunsei era he forged for a time in Osaka before returning to Edo, and from his lord Rakuō he was granted the two characters "Shinmyō," which he cut on the works he held most successful. The hand the setsumei describe is a Soshu-toned revival built on the tōran-midare of Tsuda Echizen no Kami Sukehiro, whose style Masashige privately admired (shishuku). The forging runs to tightly compacted ko-itame-hada with ji-nie adhering thickly, fine chikei entering, and at times a quiet near-muji ground; the steel reads clear.
Most blades open with a suguha or sugu yakidashi at the base and then rise into a billowing tōran-style large gunome-midare, mixed with notare, slightly pointed (togari-gokoro) elements, and arrow-nock (yahazu) shapes likened to surging waves. The temper carries deep nioi, evenly adhering ko-nie, ashi and yō, with sunagashi and kinsuji threading the edge and tobiyaki, yubashiri, and muneyaki breaking out above it; the nioiguchi tends bright. The bōshi is generally sugu ending in ko-maru, sometimes with hakikake and a long kaeri. Beyond this signature manner he also worked shallow notare of wide yakihaba and plain suguha, so the orderly large gunome that refuses to collapse, the pointed accents within the ha, and the wide mihaba of his forms serve as the readiest marks of his work. Across the register the kantei points cluster around that controlled tōran and its lively ji and ha, while one wakizashi, mingling yahazu into the edge, prompts the observation that Gonnoshin Terukane may also have been in mind. Self-carved horimono recur and aid attribution: jewel-chasing and ascending or descending dragons, bonji, the sankō-tsuka-ken, and hi, with tangs reading "hori dōsaku" to record the smith's own chisel. Several inscriptions carry documentary weight, naming Surugadai and Shundai in Buyō as places of forging, Ishū Dewa iron also used by Katayama Munetsugu, and a commission for Kosugi Tamenaga, a retainer of the Koga domain; a Juyo wakizashi signed "Ōshū Shirakawa kashin Masashige" bears self-cut dragon, bonji, and sankō-tsuka-ken recorded on its tang. The blades signed with bold, thick-chisel mei over ubu tangs finished in keshō ō-sujikai, dated through the Kansei and Kyōwa years, mark Tegarayama as a Himeji-rooted shinshintō line whose strength lay in the recreation of Sukehiro's waves. Learn more →
| Smith | Era | Designated |
|---|---|---|
| Masashige正繁 | 1789-1801 | 13 |
| Ujishige氏繁 | 1751-1764 | 0 |
| Ujishige氏繁 | 1781-1789 | 0 |
| Ujishige氏繁 | 1789-1801 | 0 |
| Masanao正直 | 1804-1818 | 0 |
The Shinshintō revival
Around 1800 Suishinshi Masahide argued in his writings that the craft must return to the old masters’ methods: the fukkotō revival. His greatest successor Naotane worked convincingly in Bizen and Sōshū manners that had been dead for centuries.
A Hozon-certified blade judged to show notably superior workmanship and a better state of preservation. The bar is higher: re-tempered blades and most unsigned Muromachi/Edo works are excluded.
The NBTHK (Nihon Bijutsu Tōken Hozon Kyōkai, the Society for the Preservation of Japanese Art Swords) is a public-interest incorporated foundation founded in 1948 and supervised by Japan’s Agency for Cultural Affairs (Bunkachō); it is based at the Japanese Sword Museum in Tokyo. Its expert panels physically examine each submitted work (shinsa) and issue a certificate (kanteishō) ranking it by artistic and historical merit. NBTHK papers are the most widely recognized standard of authentication for Japanese swords and fittings.
NBTHK official siteNo cooling-off period or returns; refund only if the purchased sword is proven fake, capped at purchase price (excludes commission sales, accessories, auction items).
