This tsuba features a chrysanthemum flower bed design, crafted by Aizu Shoami. The dense, vertical lines resemble bamboo or heavy rain, enhancing the elegant appearance of the chrysanthemums. Made of iron, it is from the Edo period and shows slight scuffs.
NihontoWatchmei · Aizu Shoami · Edo
Iron-tsuba
6 pieces on the market now
The Shoami (正阿弥) lineage is one of the most broadly distributed metalworking traditions in the history of Japanese sword fittings. Originating among the ami-shu communities who served as doboboshu in Kyoto during the Muromachi period, the earliest practitioners -- now referred to collectively as Ko-Shoami -- were specialist makers of tosogu who later became specialized tsuba craftsmen. Over the course of the Edo period the lineage spread widely as its members relocated at the invitation of daimyo across the provinces, establishing distinct regional branches. Among the best-known are the Kyo-Shoami, believed to descend from the original Kyoto line, followed by the Iyo, Awa, Aizu, Shonai, Akita, Bizen, and Edo branches. Within the Iyo-Shoami alone, four principal groups are recognized by the leading character used in their signatures. The Akita branch produced a succession of domain-retained artisans (hanko) serving the Satake lords, while the Okayama line maintained a hereditary position under the Ikeda domain of Bizen Province.
The technical vocabulary of Shoami work is remarkably wide, reflecting the lineage's geographic and temporal breadth. The earliest Ko-Shoami tsuba are typically iron plates of well-forged metal with polished migaki-ji grounds, enlivened by ji-sukashi openwork and nunome-zogan inlay in gold, silver, and other metals. A Ko-Shoami tsuba in the Higo Hosokawa transmission, for instance, displays boldly pierced square-seal forms with hizashi-yasuri file marks into which shakudo inlay is set, producing an iron ground of deep purplish tone that harmonizes with the metalwork to exquisite effect. Later signed masters commanded an expanded repertoire: Shoami Hikojuro of Kyoto executed refined nanako on shakudo grounds with gold iroe and inome-sukashi; Shoami Morikuni of Iyo worked iron plates in unusual hexagonal forms with suaka, silver, and gold inlay to render grape trellises with rugged strength and tactile realism; and Shoami Katsuyoshi of Okayama, the ninth-generation head of the Bizen line, produced takabori compositions of commanding force on oborogin and shakudo grounds, executing iroe with painstaking precision. In his mushizukushi (insect-compendium) daishо pair, insects carved in shakudo with sparing gold and suaka accents achieve a pronounced visual effect through sheer economy of means.
The Shoami lineage's significance lies not only in the quality of its individual masters but in the school's role as a connective tissue across the geography and chronology of Japanese metalwork. The date inscription "Keicho 8" on Hikojuro's tachi tsuba is recognized as being of exceptionally high documentary value for the advancement of Shoami studies. Ko-Shoami works, though lacking widely celebrated masterpieces in the conventional sense, display a characteristic manner -- clean openwork, firm nunome-zogan, and well-proportioned iron plates -- that established the idiom for generations of successors. Katsuyoshi, working at the terminal end of the tradition, absorbed aspects of Goto Ichijo's manner through his elder brother Issho and carried the vigor of his chisel into post-Restoration decorative arts, applying inherited sword-fitting techniques to vases, incense burners, and okimono. Across five centuries, from Muromachi-period Kyoto to Meiji-era Okayama, the Shoami name encompasses one of the most enduring and geographically pervasive metalworking traditions in the Japanese canon.
Where Shoami stands among comparable artisans: across all of nihontō, and within tradition, era, and period. The tiers (Foremost · Leading · Major · Notable) weigh official designations from the NBTHK and Japan's Agency for Cultural Affairs, together with historical honors of lasting repute such as the Sansaku and Meibutsu-chō.
Select a lens to see how it's measured.
Iron-tsuba · Kyoto
180 pieces on the market now
The Shoami (正阿弥) school arose in Kyoto as one of the principal lineages among the specialist tsuba makers who came to the fore from the middle through the late Muromachi period. Its roots lie in the capital's communities of ami-shū, who served as dōbōshū (attendant artisans) and within whose circles Shōami lineages existed; the prevailing view today is that these artisans originally worked as makers of tōsōgu in general and later became specialized tsuba craftsmen. Works of this early Kyoto phase are customarily referred to as Ko-Shōami ("Old Shōami") — a corpus without widely celebrated signed masterpieces, yet one that defines the school's foundation. In the Momoyama period the group prospered in Kyoto: the maker Hikojūrō, whose tachi tsuba and ō-seppa bear the date Keichō 8 (1603), belonged to this flourishing. Entering the Edo period, the school's craftsmen migrated and formed flourishing offshoots in many regions — chief among them, in the setsumei, the Akita Shōami, founded in effect by Denbei Shigeyoshi, an officially retained artisan of the Satake lords from Enpō 3 (1675) whose main line continued through Dennai Shigetaka, Denshichi Shigetsune, and Kakitsu Shigeō, and the Okayama Shōami, whose Tōshirō (Fujishirō) house served the Ikeda domain into the nineteenth century. Surveying the style of works termed Ko-Shōami, the usual practice is to pierce the iron plate with openwork carving and then apply nunome-zōgan (textile-pattern inlay) in gold, silver, and other metals. Characteristic are thin, well-forged plates of polished ground (migaki-ji) with daring large openwork — paired square seals, namako apertures, four-petaled flowers, diamond clouds with warabite — enlivened by hizashi-yasuri ("sun-ray" file marks) with shakudō inlay, rope-pattern silver inlay on the rim, or linked thunder-pattern (raimon-tsunagi) gold nunome-zōgan. The school equally commanded the formal soft-metal idiom: tachi fittings and itomaki tachi koshirae suites associated with Hikojūrō, Chōemon, and the Akita master Rokumi are executed in shakudō nanako-ji with family crests scattered in gold iroe.
The regional branches developed distinct vocabularies. Shōami Denbei — born in Shōnai in Keian 4 (1651), trained in Edo under Shōami Yoshinaga, and Akita's foremost metalworker — rendered local subjects such as Akita's famed butterbur (fuki) and cloud-and-dragon themes in nikubori ji-sukashi with inlay, produced guri-bori achieving effects reminiscent of lacquer tsuishu, and deployed line inlay, nunome-zōgan, and gold cloisonné inlay entirely identical to the methods of the main Hirata lineage. In Okayama, Shōami Katsuyoshi united weighty takabori with painstakingly meticulous inlay in gold, silver, shakudō, suaka, and shibuichi, absorbing aspects of Gotō Ichijō's manner through his elder brother Katsuzane. The setsumei attest the school's standing at the highest levels of warrior culture: Ko-Shōami guards grace mountings transmitted in the Higo Hosokawa family and the "Great Tokugawa" house, a Higo koshirae modeled on the "Nobunaga koshirae," and the personal mounting of Terao Nobuyuki, senior disciple of Miyamoto Musashi. Dated works — Hikojūrō's Keichō 8 set, judged of exceptionally high documentary value for the advancement of Shōami studies, and Rokumi's guard of Tenmei 2 (1782) — anchor the school's chronology. Denbei's work is praised as conveying the well-practiced hand of traditions inherited from the Shōami forebears, adding elegance to the ideal of practical beauty, while the narrative guards of Denshichi and Shigeteru sustained the Akita line's assured composition and carving under Satake patronage. The tradition closed with Katsuyoshi, ninth head of the Okayama Shōami, who ceased making sword fittings upon the Haitōrei of Meiji 9 (1876); masterpieces such as his Jikokuten guard and the Naniwa-gata uta-e tsuba carved in his seventy-third year stand among the summits of late metalwork, securing this widespread network — to which perhaps a tenth of all surviving tsuba is attributed — an enduring place in the tosogu canon. Learn more →
| Smith | Era | Designated |
|---|---|---|
| Denbei傳兵衛 | — | 13 |
| Shoami Katsuyoshi正阿弥勝義 | — | 7 |
| Matashichi又七 | — | 0 |
| Yoshikazu吉一 | — | 0 |
| Jihachiro治八郎 | — | 0 |
We could not find an authenticity certificate on the seller’s listing. Japanese swords and fittings are normally papered by the NBTHK (or the NTHK). Without one, the attribution is the seller’s own assessment and has not been independently verified — treat it with caution and ask the dealer about certification before buying.
If you judge that the condition of the delivered item differs significantly from the photos or description on our site, a return is possible. However, the return shipping cost is the customer's responsibility. To use cooling-off, please apply in writing by postal mail within one week of the item's arrival. The return shipping cost is the customer's responsibility.
¥25,000
This tsuba features a chrysanthemum flower bed design, crafted by Aizu Shoami. The dense, vertical lines resemble bamboo or heavy rain, enhancing the elegant appearance of the chrysanthemums. Made of iron, it is from the Edo period and shows slight scuffs.
NihontoWatchmei · Aizu Shoami · Edo
Iron-tsuba
6 pieces on the market now
The Shoami (正阿弥) lineage is one of the most broadly distributed metalworking traditions in the history of Japanese sword fittings. Originating among the ami-shu communities who served as doboboshu in Kyoto during the Muromachi period, the earliest practitioners -- now referred to collectively as Ko-Shoami -- were specialist makers of tosogu who later became specialized tsuba craftsmen. Over the course of the Edo period the lineage spread widely as its members relocated at the invitation of daimyo across the provinces, establishing distinct regional branches. Among the best-known are the Kyo-Shoami, believed to descend from the original Kyoto line, followed by the Iyo, Awa, Aizu, Shonai, Akita, Bizen, and Edo branches. Within the Iyo-Shoami alone, four principal groups are recognized by the leading character used in their signatures. The Akita branch produced a succession of domain-retained artisans (hanko) serving the Satake lords, while the Okayama line maintained a hereditary position under the Ikeda domain of Bizen Province.
The technical vocabulary of Shoami work is remarkably wide, reflecting the lineage's geographic and temporal breadth. The earliest Ko-Shoami tsuba are typically iron plates of well-forged metal with polished migaki-ji grounds, enlivened by ji-sukashi openwork and nunome-zogan inlay in gold, silver, and other metals. A Ko-Shoami tsuba in the Higo Hosokawa transmission, for instance, displays boldly pierced square-seal forms with hizashi-yasuri file marks into which shakudo inlay is set, producing an iron ground of deep purplish tone that harmonizes with the metalwork to exquisite effect. Later signed masters commanded an expanded repertoire: Shoami Hikojuro of Kyoto executed refined nanako on shakudo grounds with gold iroe and inome-sukashi; Shoami Morikuni of Iyo worked iron plates in unusual hexagonal forms with suaka, silver, and gold inlay to render grape trellises with rugged strength and tactile realism; and Shoami Katsuyoshi of Okayama, the ninth-generation head of the Bizen line, produced takabori compositions of commanding force on oborogin and shakudo grounds, executing iroe with painstaking precision. In his mushizukushi (insect-compendium) daishо pair, insects carved in shakudo with sparing gold and suaka accents achieve a pronounced visual effect through sheer economy of means.
The Shoami lineage's significance lies not only in the quality of its individual masters but in the school's role as a connective tissue across the geography and chronology of Japanese metalwork. The date inscription "Keicho 8" on Hikojuro's tachi tsuba is recognized as being of exceptionally high documentary value for the advancement of Shoami studies. Ko-Shoami works, though lacking widely celebrated masterpieces in the conventional sense, display a characteristic manner -- clean openwork, firm nunome-zogan, and well-proportioned iron plates -- that established the idiom for generations of successors. Katsuyoshi, working at the terminal end of the tradition, absorbed aspects of Goto Ichijo's manner through his elder brother Issho and carried the vigor of his chisel into post-Restoration decorative arts, applying inherited sword-fitting techniques to vases, incense burners, and okimono. Across five centuries, from Muromachi-period Kyoto to Meiji-era Okayama, the Shoami name encompasses one of the most enduring and geographically pervasive metalworking traditions in the Japanese canon.
Where Shoami stands among comparable artisans: across all of nihontō, and within tradition, era, and period. The tiers (Foremost · Leading · Major · Notable) weigh official designations from the NBTHK and Japan's Agency for Cultural Affairs, together with historical honors of lasting repute such as the Sansaku and Meibutsu-chō.
Select a lens to see how it's measured.
Iron-tsuba · Kyoto
180 pieces on the market now
The Shoami (正阿弥) school arose in Kyoto as one of the principal lineages among the specialist tsuba makers who came to the fore from the middle through the late Muromachi period. Its roots lie in the capital's communities of ami-shū, who served as dōbōshū (attendant artisans) and within whose circles Shōami lineages existed; the prevailing view today is that these artisans originally worked as makers of tōsōgu in general and later became specialized tsuba craftsmen. Works of this early Kyoto phase are customarily referred to as Ko-Shōami ("Old Shōami") — a corpus without widely celebrated signed masterpieces, yet one that defines the school's foundation. In the Momoyama period the group prospered in Kyoto: the maker Hikojūrō, whose tachi tsuba and ō-seppa bear the date Keichō 8 (1603), belonged to this flourishing. Entering the Edo period, the school's craftsmen migrated and formed flourishing offshoots in many regions — chief among them, in the setsumei, the Akita Shōami, founded in effect by Denbei Shigeyoshi, an officially retained artisan of the Satake lords from Enpō 3 (1675) whose main line continued through Dennai Shigetaka, Denshichi Shigetsune, and Kakitsu Shigeō, and the Okayama Shōami, whose Tōshirō (Fujishirō) house served the Ikeda domain into the nineteenth century. Surveying the style of works termed Ko-Shōami, the usual practice is to pierce the iron plate with openwork carving and then apply nunome-zōgan (textile-pattern inlay) in gold, silver, and other metals. Characteristic are thin, well-forged plates of polished ground (migaki-ji) with daring large openwork — paired square seals, namako apertures, four-petaled flowers, diamond clouds with warabite — enlivened by hizashi-yasuri ("sun-ray" file marks) with shakudō inlay, rope-pattern silver inlay on the rim, or linked thunder-pattern (raimon-tsunagi) gold nunome-zōgan. The school equally commanded the formal soft-metal idiom: tachi fittings and itomaki tachi koshirae suites associated with Hikojūrō, Chōemon, and the Akita master Rokumi are executed in shakudō nanako-ji with family crests scattered in gold iroe.
The regional branches developed distinct vocabularies. Shōami Denbei — born in Shōnai in Keian 4 (1651), trained in Edo under Shōami Yoshinaga, and Akita's foremost metalworker — rendered local subjects such as Akita's famed butterbur (fuki) and cloud-and-dragon themes in nikubori ji-sukashi with inlay, produced guri-bori achieving effects reminiscent of lacquer tsuishu, and deployed line inlay, nunome-zōgan, and gold cloisonné inlay entirely identical to the methods of the main Hirata lineage. In Okayama, Shōami Katsuyoshi united weighty takabori with painstakingly meticulous inlay in gold, silver, shakudō, suaka, and shibuichi, absorbing aspects of Gotō Ichijō's manner through his elder brother Katsuzane. The setsumei attest the school's standing at the highest levels of warrior culture: Ko-Shōami guards grace mountings transmitted in the Higo Hosokawa family and the "Great Tokugawa" house, a Higo koshirae modeled on the "Nobunaga koshirae," and the personal mounting of Terao Nobuyuki, senior disciple of Miyamoto Musashi. Dated works — Hikojūrō's Keichō 8 set, judged of exceptionally high documentary value for the advancement of Shōami studies, and Rokumi's guard of Tenmei 2 (1782) — anchor the school's chronology. Denbei's work is praised as conveying the well-practiced hand of traditions inherited from the Shōami forebears, adding elegance to the ideal of practical beauty, while the narrative guards of Denshichi and Shigeteru sustained the Akita line's assured composition and carving under Satake patronage. The tradition closed with Katsuyoshi, ninth head of the Okayama Shōami, who ceased making sword fittings upon the Haitōrei of Meiji 9 (1876); masterpieces such as his Jikokuten guard and the Naniwa-gata uta-e tsuba carved in his seventy-third year stand among the summits of late metalwork, securing this widespread network — to which perhaps a tenth of all surviving tsuba is attributed — an enduring place in the tosogu canon. Learn more →
| Smith | Era | Designated |
|---|---|---|
| Denbei傳兵衛 | — | 13 |
| Shoami Katsuyoshi正阿弥勝義 | — | 7 |
| Matashichi又七 | — | 0 |
| Yoshikazu吉一 | — | 0 |
| Jihachiro治八郎 | — | 0 |
We could not find an authenticity certificate on the seller’s listing. Japanese swords and fittings are normally papered by the NBTHK (or the NTHK). Without one, the attribution is the seller’s own assessment and has not been independently verified — treat it with caution and ask the dealer about certification before buying.
If you judge that the condition of the delivered item differs significantly from the photos or description on our site, a return is possible. However, the return shipping cost is the customer's responsibility. To use cooling-off, please apply in writing by postal mail within one week of the item's arrival. The return shipping cost is the customer's responsibility.
¥25,000
